Gigabyte GV-R80L256V Manual - Page 7
not push down the heat pipe.
View all Gigabyte GV-R80L256V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. Warning! When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the GPU and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is runnnig . After installation, please connect the power cable to your GV-R80L256V graphics card, or the system will not boot. 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. 9-Pin for VIVO To Flat Panel Display To VGA Monitor You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation