Gigabyte GV-R80X256V Manual - Page 8

English 4. Locate the AGP slot. If necessary, remove the metal coverfromthis slot; then align your graphics card with theAGP slot, and press it in firmly until the card is fully seated. 5. Replacethe screwto fastenthe cardinplace, and replace the computer cover. After installation, please connect the power cable to your GV-R80X256D/ GV-R80X256V graphics card, or system will not boot. 6. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To TV or V CR (GV-R80X256D) To Flat P anel Display To VG A Monitor VIV O 9 P in (GV-R80X256V) You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. GV-R80X256D(V) Graphics Accelerator - 8 -