Gigabyte GV-R9700 PRO Manual - Page 10
You are now ready to proceed with the installation of the Graphics card driver. For detailed
View all Gigabyte GV-R9700 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your Graphics card with the AGP slot, and press it in firmly until the card is fully eated. 5. Replace the screw to fasten the card in place, and replace the computer cover. R9700 PRO Graphics card AGP Slot After installation, please connect the power cable to your R9700 PRO graphics card, or system will not boot. 6. Plug the display cable into your card; then turn on the computer and monitor. If your Graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV or VCR You are now ready to proceed with the installation of the Graphics card driver. For detailed instructions, select your operating system from the list below. R9700 PRO Graphics Accelerator - 8 -