Gigabyte GV-R98X256D Manual - Page 10
you can connect a flat panel display to
View all Gigabyte GV-R98X256D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully eated. 5. Replace the screw to fasten the card in place, and replace the computer cover. After installation, please connect the power cable to your GV-R98X256D graphics card, or system will not boot. 6. Plug the display cable into your card; then turn on the computer and monitor. If your gsraphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To TV or VCR To Flat Panel Display You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. GV-R98X256D Graphics Accelerator - 8 -