Gigabyte GV-RX24T256HP Manual - Page 9
Locate the PCI Express x16 slot. If - drivers
View all Gigabyte GV-RX24T256HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English To install your new graphics card: 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. * Please make sure that the gold edge connector of the graphics card is securely inserted. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below. Or use the DVI-I-to-HDMI adapter to connect an HDMI monitor. To D-Sub Monitor To TV/VCR To Flat Panel Display Connect an HDMI monitor via DVI-I to HDMI adapter You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation