Gigabyte GV-RX30HM256DP-RH Manual - Page 9
Locate the PCI Express x 16 slot. If - driver vga
View all Gigabyte GV-RX30HM256DP-RH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 4. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To connect a flat panel directly to your graphics card, use the DVI-I connector. To connect a VGA monitor to the DVI-I connector, plug the DVI-I to D-sub adapter into the DVI-I connector, then plug the monitor cable into the adapter. Connect a flat panel To Flat Panel Display To TV or VCR To VGA Monitor (only for GV-RX30HM256DP-RH) You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation