Gigabyte GV-RX60P128DE Manual - Page 12
To install your new graphics card - driver
View all Gigabyte GV-RX60P128DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English To install your new graphics card: 1. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the flat panel display cable into your card; then turn on the computer and monitor. If you wish to connect a VGA monitor via the adapter, connect the 15-pin display cable of the VGA monitor to the VGA connector of the adapter. To Flat Panel Display To TV or VCR To VGA Monitor You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. GV-RX60P128DE/GV-RX60P256DP Graphics Accelerator - 8 -