Gigabyte GV-RX70P128D Manual - Page 10
Locate the PCI Express x 16 slot. If - drivers
View all Gigabyte GV-RX70P128D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 4. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To Flat Panel Display To VGA Monitor 9-Pin for VIVO only (Only for GV-RX70P256V) 7-Pin for TV-out only (Only for GV-RX70P128D) You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. GV-RX70P256V/GV-RX70P128D Graphics Accelerator - 8 -
GV-RX70P256V/GV-RX70P128D Graphics Accelerator
- 8 -
English
4. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from
this slot; then align your graphics card with
the PCI Express x 16 slot, and press it in
firmly until the card is fully seated.
5.
Replace the screw to fasten the card in
place, and replace the computer cover.
6.
Plug the display cable into your graphics
card; then turn on the computer and
monitor.
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
To Flat Panel Display
7-Pin for TV-out only
(Only for GV-RX70P128D)
To VGA Monitor
9-Pin for VIVO only
(Only for GV-RX70P256V)