Gigabyte GV-RX80256DE Manual - Page 7
Locate the PCI Express x 16 slot. If - driver
![]() |
View all Gigabyte GV-RX80256DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English To install your new graphics card: 1. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your graphics card; then turn on the computer and monitor. To Flat Panel Display To VGA Monitor 7-Pin for TV-out only Warning! To avoid system instability, do not touch the graphics card when it is runnnig . You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation
![](/manual_guide/products/gigabyte-gvrx80256de-manual-569c82d/7.png)
Hardware Installation
- 7 -
English
3.
Plug the display cable into your graphics
card; then turn on the computer and
monitor.
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
To Flat Panel Display
7-Pin for TV-out only
To VGA Monitor
To install your new graphics card:
1.
Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
2.
Replace the screw to fasten the card in place,
and replace the computer cover.
Warning!
To avoid system instability, do not touch the graphics card when it is runnnig .