Gigabyte GV-RX80L512V Manual - Page 7
Locate the PCI Express x 16 slot. If
View all Gigabyte GV-RX80L512V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English 4. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. Warning! When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the graphics chip and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is runnnig . 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the flat panel display cable into your card; then turn on the computer and monitor. If you wish to connect a VGA monitor via the adapter, connect the 15-pin display cable of the VGA monitor to the VGA connector of the adapter. To Flat Panel Display 9-Pin for VIVO You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation