Gigabyte H310N 2.0 User Manual - Page 11
RJ-45 LAN Port, USB 2.0/1.1 Port, Line In/Rear Speaker Out Blue, Line Out/Front Speaker Out Green
View all Gigabyte H310N 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RJ-45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. Connection/ Speed LED Activity LED LAN Port Connection/Speed LED: State Description Orange Green 1 Gbps data rate 100 Mbps data rate Off 10 Mbps data rate Activity LED: State Blinking Off Description Data transmission or receiving is occurring No data transmission or receiving is occurring USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices. Line In/Rear Speaker Out (Blue) The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out/Front Speaker Out (Green) The line out jack. Use this audio jack for a headphone or 2-channel speaker. Mic In/Center/Subwoofer Speaker Out (Pink) The Mic in jack. Audio Jack Configurations: Jack Headphone/ 2-channel 4-channel 5.1-channel 7.1-channel Line In/Rear Speaker Out a a a Line Out/Front Speaker Out a a a a Mic In/Center/Subwoofer Speaker Out a a Front Panel Line Out/ Side Speaker Out a To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. •• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. •• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Please visit GIGABYTE's website for details on configuring the audio software. - 11 -