Gigabyte H370N WIFI Users Manual - Page 32

Peripherals, Initial Display Output, OnBoard LAN Controller LAN2, EZ RAID, Above 4G Decoding

Get Gigabyte H370N WIFI PDF manuals and user guides View all Gigabyte H370N WIFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

2-6 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the first display. PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) && OnBoard LAN Controller (LAN2) Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. && EZ RAID Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. && Above 4G Decoding Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and their drivers are not able to be launched when entering the operating system (because of the limited 4 GB memory address space). (Default: Disabled) && RGB Fusion Allows you to set the LED lighting mode for the motherboard. Off Disables this function. Pulse Mode Color Cycle Static Mode All LEDs simultaneously fade in and fade out. All LEDs simultaneously cycle through a full spectrum of colors. All LEDs emit a single color. (Default) Flash Mode All LEDs simultaneously flash on and off. Double Flash All LEDs flash in an interlaced pattern. && LEDs in Sleep, Hibernation, and Soft Off States Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state. This feature is supported only with a 5V digital LED strip. Off Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default) On Enables the selected lighting mode when the system enters S3/S4/S5 state. - 32 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
2-6
Peripherals
&
Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
±
IGFX
Sets the onboard graphics as the first display.
±
PCIe 1 Slot
Sets the graphics card on the PCIEX16 slot as the first display. (Default)
&
OnBoard LAN Controller (LAN2)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled
.
&
EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
&
Above 4G Decoding
Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and
their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)
&
RGB Fusion
Allows you to set the LED lighting mode for the motherboard.
±
Off
Disables this function.
±
Pulse Mode
All LEDs simultaneously fade in and fade out.
±
Color Cycle
All LEDs simultaneously cycle through a full spectrum of colors.
±
Static Mode
All LEDs emit a single color. (Default)
±
Flash Mode
All LEDs simultaneously flash on and off.
±
Double Flash
All LEDs flash in an interlaced pattern.
&
LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This feature is supported only with a 5V digital LED strip.
±
Off
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
±
On
Enables the selected lighting mode when the system enters S3/S4/S5 state.
- 32 -