Gigabyte H470M H User Manual - Page 22

F_USB3 F _0 13) SPI_TPM (Trusted Platform Module Header) You may connect an SPI TPM (Trusted Platform Module) to this header. _ _B _ S_ _ S F_ Pin No. Definition _F 1 Data Output 11 1 12 2 2 Power (3.3V) 3 No Pin 4 NC 5 Data Input 6 CLK _0 F 7 Chip Select 8 GND 9 IRQ 10 NC 11 NC 12 RST B S S_F B_ 14) CLR_CMOS (_Clear CMOS FJumper) _3 U Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. F_USB3 F_USB30 3 _ Open: Normal Short: Clear CMOS Values •• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (please navigate to the "BIOS Setup" page of GIGABYTE's website for more information). - 22 -