Gigabyte H610M S2H V2 User Manual - Page 19

DEBUG PORT DEBUG PORT 6) SATA3 4/5/6/7 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. DEBUG PORT DEBUG PORT 77 SATA3 67 45 11 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "SATA Configuration" for more information. 7) M2P_SB (M.2 Socket 3 Connector) The M.2 connectors on the motherboard support only M.2 PCIe SSDs. 110 42 60 80 _3 Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Locate the proper mounting hole for the M.2 SSD to be installed and then install the mounting clip first. Step 2: Pull the clip's tab up and out of the mounting hole. Slide the M.2 SSD into the connector at an angle. Step 3: Press the M.2 SSD down and then secure it by pressing the clip's tab into the mounting hole. U * Types of M.2 SSDs supported by the M.2 connector: M.2 PCIe x4 SSD M.2 PCIe x2 SSD M2P_SB a a M.2 SATA SSD r - 19 -