Gigabyte J4105N H User Manual - Page 6

1-2 Product Specifications CPU Memory Onboard Graphics Audio ŠŠ Built in with an Intel® Quad-Core Celeron® J4105 SoC (2.5 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. ŠŠ 4 MB Cache ŠŠ 2 x DDR4 SO-DIMM sockets supporting up to 16 GB of system memory ŠŠ Dual channel memory architecture ŠŠ Support for DDR4 2400/2133 MHz memory modules ŠŠ Support for non-ECC memory modules ŠŠ Integrated in the SoC: - 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz - 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI 2.0a version and HDCP 2.2. ŠŠ Realtek® ALC887 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN ŠŠ Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ŠŠ ŠŠ Storage Interface ŠŠ USB ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ 1 x PCI Express x1 slot, running at x1 (The PCIEX1 slot conforms to PCI Express 2.0 standard.) 1 x M.2 Socket 1 connector for the wireless communication module (CNVI WIFIBRACKET_A) Integrated in the SoC: - 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2 SSD support) - 2 x SATA 6Gb/s connectors * Refer to "1-6 Internal Connectors," for the installation notices for the M.2 and SATA connectors. Integrated in the SoC: - 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) - 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header) 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 1 x SoC fan header 1 x system fan header 1 x M.2 Socket 3 connector 1 x front panel header 1 x front panel audio header 1 x USB 3.1 Gen 1 header 1 x USB 2.0/1.1 header 1 x parallel port header 1 x serial port header - 6 -