Gigabyte MZJ19AI Manual - Page 19

F_AUDIO Front Panel Audio Header, BATCON Battery Cable Connector

Page 19 highlights

12) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it. Pin No. Definition 1 MIC_L 2 GND 21 3 MIC_R 4 -ACZ_DET 5 HPOUT_R 6 GND 10 9 7 FAUDIO_J 8 NC 9 HPOUT_L 10 GND 13) BATCON (Battery Cable Connector) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. 2 Pin No. Definition 1 RTC Reset 1 2 GND • Always turn off your computer and unplug the power cord before replacing the battery. • Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect model. • Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. • Used batteries must be handled in accordance with local environmental regulations. - 19 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

- 19 -
Hardware Installation
12) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect
your chassis front panel audio module to this header. Make sure the wire assignments of the module
connector match the pin assignments of the motherboard header. Incorrect connection between the
module connector and the motherboard header will make the device unable to work or even damage it.
Pin No.
Definition
1
MIC_L
2
GND
3
MIC_R
4
-ACZ_DET
5
HPOUT_R
6
GND
7
FAUDIO_J
8
NC
9
HPOUT_L
10
GND
1
2
9
10
1
2
13) BATCON (Battery Cable Connector)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a
low level, or the CMOS values may not be accurate or may be lost.
Always turn off your computer and unplug the power cord before replacing the battery.
Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect
model.
Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or
uncertain about the battery model.
Used batteries must be handled in accordance with local environmental regulations.
Pin No.
Definition
1
RTC Reset
2
GND