Gigabyte ODIN Pro 800W User Manual - Page 15

English 3. Installation Instruction (For a new system, please go directly to Section 4) 1. Switch off the system. 2. Disconnect the power cord from your old power supply. 3. Follow the direction provided in your case's user manual to open your computer case. 4. Disconnect all the power connectors from the power supply to the motherboard and the peripheral devices such as the case fans, hard drives, and floppy drives, etc. 5. Remove the existing power supply from your computer case 6. Insert Odin GT power supply into the chassis and secure it with screws 7. Connect the 24-pin main power connector and the 4-pin/8pin +12V to your motherboard as needed. 8. Connect the 4 / 8-pin 12V CPU power connector to your motherboard as needed 9. When there is a need for PCI-E power, please use the PCI-E connector from the power supply unit first. When you are using more than two graphic cards (SLI, crossfire or quad - SLI), please use Smart Cable management PCI-E power connectors. Note: Please refer to your PCI express graphic card's user manual for usage details. 15