Gigabyte P34G v2 Manual - Page 7
Setup Your System for RAID 0/1 - bios
View all Gigabyte P34G v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English 6 Setup Your System for RAID 0/1 WARNING ●● Please backup your data before you build and run RAID 0/1 on your system. ●● RAID 1 needs two storage drives of the same specification and capacity in your laptop. ●● R AID 0 needs two storage drives of the same specification in your laptop. Different capacity is acceptable. 1 • Press F2 when computer starts to Enter BIOS setup utility. • Go to Advanced > SATA configuration. 2 • Change "SATA Mode selection" from "AHCI" to "RAID". • Press F10 to save and exit. The system will restart automatically. 3 • Once the system restarts. Go to "All Apps" found at the bottom of the screen on Windows 8 and execute Intel Rapid Storage program. 4 • You will see the Intel Rapid Storage Technology Screen, Click> Create. 5 • Under Select Volume Type choose Optimized disc performance (RAID 0/1), Click > NEXT. • Under Configure Volume you may set Name to your preferred name and select both controllers. • Click > Next. You will see Confirm Volume Creation. Click > Create volume. • Wait until the system migration is complete and restart the laptop.