Gigabyte S12-P04R Slide Rails and Rack Installation Instructions - Page 1
Gigabyte S12-P04R Manual
View all Gigabyte S12-P04R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
S12-P10R/S12-P04R/S12-P04S Slide Rails and Rack Installation Instructions 1 Preparing the Slide Rail Assembly u Unpack the slide rail assembly. Pull the slide rail assembly until it reaches stop. v Push back the white latch on the front section of the slide rail assembly and simultaneously withdraw the front section from the slide rail assembly. Latch on the middle section w After withdrawing the front section, push back the middle section into the slide rail assembly. Push the latch and push back the middle section into the slide rail assembly. 2 Installing the Front Section of the Slide Rail onto the S12 Series Server Fixed bracket u Position the front section against the S12 server and make sure the mounting holes on the front section are aligned with the locating pins on the side of the server. Assemble the front section onto the S12 series server and pull back to lock on. (NOTE: Make sure the below fixed bracket is locked on.) Do the same for the other slide.