Gigabyte Z370 AORUS GAMING 7-OP User Manual - Page 59
Peripherals, OnBoard LAN Controller Rivet Networks Killer, E2500 LAN Chip, LAN2, Above 4G Decoding
View all Gigabyte Z370 AORUS GAMING 7-OP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
2-6 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the first display. PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot Sets the graphics card on the PCIEX8 slot as the first display. PCIe 3 Slot Sets the graphics card on the PCIEX4 slot as the first display. && OnBoard LAN Controller (Rivet Networks Killer™ E2500 LAN Chip, LAN2) Enables or disables the Rivet Networks Killer™ E2500 LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. && EZ RAID Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. && Above 4G Decoding Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and their drivers are not able to be launched when entering the operating system (because of the limited 4 GB memory address space). (Default: Disabled) && RGB Fusion Allows you to set the LED lighting mode for the motherboard. Off Disables this function. Pulse Mode All LEDs simultaneously fade in and fade out. Color Cycle All LEDs simultaneously cycle through a full spectrum of colors. Static Mode All LEDs emit a single color. (Default) Flash Mode All LEDs simultaneously flash on and off. Double Flash All LEDs flash in an interlaced pattern. - 59 - BIOS Setup