Gigabyte Z370N WIFI Users Manual - Page 16
D_LED Digital LED Strip Header, DLED_V_SW1 Digital LED Strip Power Select Jumper
View all Gigabyte Z370N WIFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
S SF _ _ S _S _S S_ _ B _U _ B F_USB3 F _ 7) LED_C (RGB (RGBW) LED Strip Header) The header can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with maximum power rating of 2A (12V) and maximum length of 2m. U Pin No. Definition 1 12V 2G 3R 1 4B RGBW LED Strip RGB LED Strip __ 3 5W 1 12V _ _B Connect your RGB (RGBW) LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of the digital LED strip header. Incorrect connection may S F_ lead to the damage of the LED strip. For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS Setup," "Peripherals." _ Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. 8) D_LED (Digital LED Strip Header) The header can be used to connect a standard 5050 digital LED strip, with maximum power rating of 2A (12V or 5V) and maximum length of 5m or maximum number of 300 LEDs. Pin No. Definition 1 1V 2D Digital LED Strip 3G 1 Connect your digital LED strip to the header. There are 12V and 5V digital LED strips. Be sure to verify the voltage requirements of your digital LED strip and set the DLED_V_SW1 jumper accordingly. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the digital LED strip header. Incorrect connection may lead to the damage of the LED strip. For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS Setup," "Peripherals." F _0 _F _0 F Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. 9) DLED_V_SW1 (Digital LED Strip Power Select Jumper) This jumper allows you to select the supply voltage of the D_LED header. Be sure to verify the voltage requirements of your digital LED strip and set the correct voltage with this jumper before connection. Incorrect connection may lead to the damage of the LED strip. 1 1-2: 5V 1 2-3: 12V _3 U - 16 -