Gigabyte Z390 AORUS XTREME AORUS RGB FAN COMMANDER - Page 5

Turn your system off for the installation of your AORUS RGB FAN COMMANDER. τༀAORUS RGB FAN COMMANDER f 安装AORUS RGB FAN COMMANDER AORUS RGB FAN COMMANDER Apague el sistema para instalar su AORUS RGB FAN COMMANDER. u u- u v A w C B x y D F E z English Steps: 1. Connect USB Input cable to USB IN port, and the other end connect to Motherboard's F_USB1 header. (For Gigabyte motherboard pls use USB Input cable) 1-1 If you use non-Gigabyte motherboard, pls connect MB sync cable to MB sync port, and connect the other end of corresponding header on the motherboard according to your needs. (Note 1) 2. Connect RGB Fan cable by sequentially 1~8 port, each RGB Fan cable can support PWM/DC fan, 4-pin RGB LED and 3-pin Addressable LED. (Note 2) 3. Connect USB extention cable to USB OUT port, the other end support USB 3.1 Gen 1 header. (This step is installed according to your needs.) 4. Connect Temp sensor cable to Temp port, put temp sensor in any place of chassis can monitor the temperature. (This step is installed according to your needs.) 5. Connect SATA power cable to SATA Power port, the other end connect to power supply. 6. Final step install AORUS RGB FAN COMMANDER anywhere in the chassis with enough space. Magnetic back side allows for easy installation on magnetic surfaces. 7. After installation is complete, please reboot and download the GIGABYTE Smart Fan and RGB Fusion utilities to set up the fan and RGB lighting device. ᐿ᜗ʕ˖ Ӊ᜷j 1. ਗ਼USB USB INౢࢭd F_USB1ౢࢭf USB 1-1 d MB syncౢࢭd f(ൗɓ) 2. ਗ਼RGB 1~8ٙౢࢭdӊɓૢRGB PWM/DCࠬࣂe4-pin RGB LEDձ3-pin̙ᇜ೻LEDf(ൗɚ) 3. ਗ਼USB USB OUTౢࢭd USB 3.1 Gen 1ஹટ਽f 4 Tempౢࢭd f 5. ਗ਼SATA SATA Powerౢࢭd f 6 AORUS RGB Fan Commander d f 7 Smart FanձRGB FusionʈՈ೻όd RGBዱΈༀໄf