Gigabyte Z490 AORUS ELITE User Manual - Page 8

USB Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor ŠŠ Chipset: - 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel - 1 x USB Type-C™ port with USB 3.2 Gen 1 support, available through the internal USB header - 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) ŠŠ Chipset+2 USB 2.0 Hubs: - 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) ŠŠ 1 x 24-pin ATX main power connector ŠŠ 1 x 8-pin ATX 12V power connector ŠŠ 1 x 4-pin ATX 12V power connector ŠŠ 2 x M.2 Socket 3 connectors ŠŠ 6 x SATA 6Gb/s connectors ŠŠ 1 x CPU fan header ŠŠ 1 x water cooling CPU fan header ŠŠ 3 x system fan headers ŠŠ 2 x addressable LED strip headers ŠŠ 2 x RGB LED strip headers ŠŠ 1 x front panel header ŠŠ 1 x front panel audio header ŠŠ 1 x USB Type-C™ port, with USB 3.2 Gen 1 support ŠŠ 1 x USB 3.2 Gen 1 header ŠŠ 2 x USB 2.0/1.1 headers ŠŠ 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) ŠŠ 2 x Thunderbolt™ add-in card connectors ŠŠ 1 x Clear CMOS jumper ŠŠ 1 x Q-Flash Plus button ŠŠ 2 x USB 3.2 Gen 2 Type-A ports (red) ŠŠ 4 x USB 3.2 Gen 1 ports ŠŠ 4 x USB 2.0/1.1 ports ŠŠ 2 x SMA antenna connectors (1T1R)j ŠŠ 1 x HDMI port ŠŠ 1 x RJ-45 port ŠŠ 1 x optical S/PDIF Out connector ŠŠ 5 x audio jacks ŠŠ iTE® I/O Controller Chip ŠŠ Voltage detection ŠŠ Temperature detection ŠŠ Fan speed detection ŠŠ Water cooling flow rate detection ŠŠ Overheating warning ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan speed control function is supported will depend on the fan you install. j Only for the Z490 AORUS ELITE AC. - 8 -