Graco 2M03 Owners Manual - Page 6
TroubleShooting
View all Graco 2M03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
TroubleShooting DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the operator's authority to operate the equipment. Most problems have a simple solution. First, check that: • Power is turned ON for both units • Both units are plugged in (or batteries are fresh in Parent Unit) • Electrical outlet works • Volume is turned up on Parent Unit • Parent Unit is in range of the Nursery Unit No Sound • Battery dead or weak - replace or use AC adapter. • AC adapter not properly connected - check the connections. • Nursery Unit covered or blocked - remove the obstruction. Weak Sound • Nursery Unit too far from baby - move closer. • Large objects blocking the signal - try repositioning Nursery Unit. • Volume setting too low - turn it up. Static • Interference from other electrical equipment - eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights, light dimmers, etc.) • Parent Unit too far from Nursery Unit - move them closer. • Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings & buildings. Try moving the Nursery Unit to another part of the room. Shrill Sound (Feedback) • Nursery Unit and Parent Unit too close together - move them farther apart. • Volume set too high - lower the volume. 6