Graco 7G11MAI5 Owners Manual - Page 56
Belt with Sliding Latch Plate, locking clip, To Install Locking Clip
View all Graco 7G11MAI5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
• Combination Lap/Shoulder Belt with Sliding Latch Plate This belt has a latchplate that slides freely along the belt. This belt MUST be converted to prevent movement of the lap portion of the belt. You must use the locking clip provided with the infant restraint, unless your vehicle's seat belt can be converted in another way as described in your vehicle owner's manual. Locking clip To Install Locking Clip: 1. Tighten the buckled belt by pushing down hard on the infant restraint and pulling hard on the shoulder belt. ½ inch 2. While pushing down on infant restraint, pinch the two straps together behind the buckle tongue. Unbuckle the belt without allowing it to slip. 3. Connect lap and shoulder belts with locking clip as shown and . 4. Rebuckle belt. Check that lap belt does not move by pulling and pushing hard on infant restraint. If belt loosens or lengthens, repeat procedure. Locking clip goes here, 1/2 inch from the buckle 24