Graco 8C04FCA2 Instruction Manual - Page 24
Belt Routing, fig. h, fig. i, fig. k and fig. l, BEFORE, fig. j, DO NOT, Rotating LATCH Belt, under
UPC - 047406096961
View all Graco 8C04FCA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
OPERATIONS and ADJUSTMENTS (continued) 8 LATCH Belt Routing: LATCH belt MUST be routed through the proper openings depending on direction of child restraint use. A Remove pad from front of seat area by pulling out 2-button clips on lower front edge of child restraint (fig. h) and 2-button clip in center of seat. Removing pad will expose the rotating LATCH belt. (fig. i) (fig. h) (fig. i) Rotating LATCH Belt (under seat pad) B Rotate LATCH belt so that the belt routes through the proper openings (Pg 23, fig. k and fig. l). Belts must remain flat and tight against the child restraint BEFORE reattaching the three seat pad 2-button clips. (fig. j) LATCH belt must not interfere with the harness. C Re-attach pad to child restraint by snapping the three 2-button clips back in place. DO NOT allow 2-button clip to interfere with the LATCH belt or vehicle seat belt. 22 Belt must be flat and tight (fig. j)