HTC TOUCH DUAL Read Me First - Page 2

Quick Setup Wizard, Synchronize Your Device and Computer, HTC Home, TouchFLO™, Before Using Your - software

Page 2 highlights

Before Using Your Device A. Remove the back cover Hold the device in place with one hand and with your other hand's thumb or finger, lift up the bottom of the back cover. Lift from here. B. Install the SIM Card Cut corner of SIM card Insert the SIM card with the gold contacts facing down and the cut corner on the outside 2 Pull back the red 1 rubber cover. 3 Close the red rubber door. C. Install the battery Install the battery by inserting 2 it with its exposed copper part aligned with the protruding copper conductor on the lower-right side of the battery compartment. Insert the bottom side of the battery first, then gently push the battery into place. Copper conductor 1 E. Charge the battery The battery is not fully charged out of the box. To charge the battery inside your device, connect the AC adapter plug to an electrical outlet and connect the USB end to the Sync connector on the left side of your device. The battery is fully charged after about 3 hours of charging. D. Replace the back cover 1 Secure the top part of the back cover by "locking" it into 3 openings on the device. 2 Press the middle portion of the back cover 3 Press the bottom part of the back cover to lock it into place. You should hear a click. F. Power on/off the device Press and hold the POWER button for about 3 seconds to power on your device. When powering off, a confirmation message will be displayed. Tap Yes to power off the device. Quick Setup Wizard When you power on your device for the first time, a Quick Start Wizard will guide you through touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and allow you to set the date, time, and a device password. Follow the on-screen instructions to complete the wizard. The Touch Phone Earpiece Second Camera Touch Screen Talk microSD™ card slot 16-key Keypad* * Slide up the front panel to reveal the keypad. Navigation Control / ENTER End Camera button HTC Home HTC Home™ is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, date and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access and a Profile selector where you can quickly change the profile or ring tone of your device. TouchFLO™ TouchFLO™ gives you better touch panel experience on your device. Using TouchFLO, you can easily scroll and pan the screen by sliding your finger on the touch panel. TouchFLO also has the Touch Cube where you can add your favorite contacts, access media, launch programs, and more. Finger scrolling While on a Web page, document, or list (such as contacts list, file list, etc.), slide your finger upward to scroll down; slide your finger downward to scroll up. To scroll to the right, slide your finger to the left. To scroll to the left, slide your finger to the right. Finger panning Touch and hold on the touch screen and then drag your finger around the screen. Touch Cube To open the Touch Cube, slide your finger upward, starting from the bottom of the touch screen where it shows a logo image. To close the Touch Cube, slide your finger downward. Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. Opening the Touch Cube Configure Data Connections When you start up your device with a SIM card installed, you see a notification message from the Connection Setup on the Today screen. Connection Setup can help you automatically set data connection settings such as GPRS/3G, MMS, and WAP. Setting up your GPRS/3G connection lets you surf the Web while on the go. 1 When you see the notification message from the Connection Setup, tap Yes. Note If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK. 2 Connection Setup then starts to configure your device's data connection settings. 3 After the Connection Setup completes the configuration, tap Restart. Use Internet Explorer® Mobile (tap Start > Internet Explorer) to surf the Web. Synchronize Your Device and Computer Synchronize your device with your computer to keep information such as Outlook e-mails, contacts, tasks, and appointments up-to-date on your device. Set up synchronization software on your computer Depending on the Operating System of your Computer, you will need either Microsoft ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with your computer. Set up ActiveSync on Windows XP 1 Install ActiveSync 4.5 on your computer from the Getting Started Disc. Set up Windows Mobile Device Center on Windows Vista® 2 Connect your device to your computer. The Synchronization Setup Wizard automatically starts and guides you to create a synchronization partnership. Click Next to proceed. 3 To synchronize your device with your computer, clear the Synchronize directly with a server running Microsoft Exchange check box and click Next. 1 Connect your device to your computer. In Windows Mobile Device Center, click Set up your device. 2 Select the information you want to synchronize and click Next. 4 Select the information types that you want to synchronize, then click Next. 5 Choose whether to allow wireless connections while your device is connected to the computer. 6 Click Finish. 3 Type a name for your device and click Set Up.

  • 1
  • 2

Quick Setup Wizard
When you power on your device for the first time, a Quick Start Wizard will guide you through
touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and
allow you to set the date, time, and a device password.
Follow the on-screen instructions to complete the wizard.
Synchronize Your Device and Computer
Synchronize your device with your computer to keep information such as Outlook e-mails,
contacts, tasks, and appointments up-to-date on your device.
Set up synchronization software on your computer
Depending on the Operating System of your Computer, you will need either Microsoft
ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with
your computer.
2
Select the information you want to
synchronize and click
Next
.
Set up Windows Mobile Device
Center on Windows Vista®
Set up ActiveSync on Windows XP
1
Install ActiveSync 4.5 on your computer
from the Getting Started Disc.
2
Connect your device to your computer.
The Synchronization Setup Wizard
automatically starts and guides you to
create a synchronization partnership. Click
Next
to proceed.
3
To synchronize your device with your
computer, clear the
Synchronize
directly with a server running Microsoft
Exchange
check box and click
Next
.
4
Select the information types that you want
to synchronize, then click
Next
.
5
Choose whether to allow wireless
connections while your device is
connected to the computer.
1
Connect your device to your
computer. In Windows Mobile Device
Center, click
Set up your device
.
3
Type a name for your device and click
Set Up
.
Click
Finish
.
6
The Touch Phone
HTC Home
HTC Home™ is a Today screen plug-in that gives you up-to-date
local information at a glance, such as time, date and weather
information, and shows new messages and missed calls. It also
has a customizable launcher where you can add your favorite
applications for one-touch access and a Profile selector where
you can quickly change the profile or ring tone of your device.
TouchFLO™
TouchFLO™
gives you better touch panel experience on your
device. Using TouchFLO, you can easily scroll and pan the screen
by sliding your finger on the touch panel. TouchFLO also has the
Touch Cube where you can add your favorite contacts, access
media, launch programs, and more.
Finger scrolling
While on a Web page, document, or list (such as contacts list, file list, etc.),
slide your finger upward to scroll down; slide your finger downward to
scroll up.
To scroll to the right, slide your finger to the left. To scroll to the left, slide
your finger to the right.
Touch Cube
To open the Touch Cube, slide your finger
upward, starting from the bottom of the
touch screen where it shows a logo image.
To close the Touch Cube, slide your finger
downward.
Touch Cube is a three-dimensional, cubic
user interface. To flip the interface from one
side to another, slide your finger left or right
on the touch screen.
Finger panning
Touch and hold on the touch screen and then drag your finger around
the screen.
Before Using Your Device
A. Remove the back cover
Press and hold the POWER button
for about
3
seconds to power on
your device.
When powering off, a confirmation
message will be displayed. Tap
Yes
to power off the device.
E. Charge the battery
The battery is not fully charged out of the box. To charge
the battery inside your device, connect the AC adapter
plug to an electrical outlet and connect the USB end to the
Sync connector on the left side of your device. The battery
is fully charged after about
3
hours of charging.
F. Power on/off
the device
B. Install the SIM Card
Hold the device in place
with one hand and
with your other hand’s
thumb or finger, lift up
the bottom of the back
cover.
Lift from here.
1
Pull back the red
rubber cover.
2
Insert the SIM card with the
gold contacts facing down
and the cut corner on the
outside
3
Close the red rubber door.
Cut corner of
SIM card
C. Install the battery
Install the battery by inserting
it with its exposed copper part
aligned with the protruding
copper conductor on the
lower-right side of the battery
compartment.
Insert the bottom side of the
battery first, then gently push
the battery into place.
Copper conductor
2
1
D. Replace the back cover
3
1
Secure the top part of the
back cover by “locking” it into
3 openings on the device.
Press the middle
portion of the back
cover
Press the bottom part of the
back cover to lock it into place.
You should hear a click.
2
Earpiece
Touch Screen
Talk
Navigation
Control /
ENTER
Camera
button
Second Camera
16-key
Keypad*
microSD™
card slot
End
*
Slide up the front panel to
reveal the keypad.
Configure Data Connections
When you start up your device with a SIM card installed, you see a notification message from the
Connection Setup
on the Today screen. Connection Setup can help you automatically set data
connection settings such as GPRS/3G, MMS, and WAP. Setting up your GPRS/3G connection lets
you surf the Web while on the go.
1
When you see the notification message from the Connection Setup, tap
Yes
.
Note
If your SIM card supports multiple network operator profiles, a message will appear with network
profile choices. Select the profile you want to use and tap
OK
.
2
Connection Setup then starts to configure your device’s data connection settings.
3
After the Connection Setup completes the configuration, tap
Restart
.
Use Internet Explorer® Mobile (tap
Start
> Internet Explorer
) to surf the Web.
Opening the Touch Cube