HTC Wildfire Cellular South Wildfire - Manual and Quick Start Guide - Page 197
Specifications - cell phones
View all HTC Wildfire Cellular South manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
197 Specifications Specifications CPU speed Platform Memory Dimensions (LxWxT) Weight Display Network Onscreen navigation GPS Sensors Connectivity Camera Audio supported formats Video supported formats Battery Expansion slot AC adapter Special features 528 MHz Android™ with HTC Sense™ ROM: 512 MB RAM: 384 MB 116.85 x 61 x 11.99 mm (4.6 x 2.4 x 0.47 inches) 115 grams (4.056 ounces) with battery 3.2-inch touch-sensitive screen with 240 x 320 QVGA resolution Dual-band (800 and 1900 MHz) CDMA2000 1xRTT/1xEVDO/1xEVDO rev. A and IS-95A/B voice or data with up to 1.8 Mbps upload and 3.1 Mbps download speeds (Band frequency and data speed are operator dependent.) Optical trackball Internal GPS antenna G-Sensor Digital compass Proximity sensor Ambient light sensor Bluetooth® 2.1 with FTP/OPP for file transfer, A2DP for wireless stereo headsets, and PBAP for phonebook access from the car kit Wi-Fi®: IEEE 802.11 b/g 3.5 mm stereo audio jack Standard micro-USB (5-pin micro-USB 2.0) 5 megapixel color camera with auto focus and flash Playback: .aac, .amr, .ogg, .m4a, .mid, .mp3, .wav, .wma Recording: .amr Playback: .3gp, .3g2, .mp4, .wmv Recording: .3gp Rechargeable Lithium-ion battery Capacity: 1300 mAh Talk time: Up to 402 minutes Standby time: Up to 300 hours (The above are subject to network and phone usage.) microSD™ memory card (SD 2.0 compatible) Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz DC output: 5V and 1A Friend Stream, App Sharing A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile phones under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic. Comparisons of different mobile phones using such a specification can therefore only be done in a controlled laboratory environment. When using any mobile phone in real life circumstances for which the mobile phone is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above. Specifications are subject to change without prior notice.