Haier 21T9B-S User Manual - Page 4

PREPARING FOR OPERATIONS Figure A Antenna connection Antenna Connect an antenna to the antenna socket on the TV set, we recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75Ω),insert the antenna plug (see figure C) into 75Ωsocket (see figure A). 2.If you use a twin-lead cable(300Ω),please Figure B shape the cable as figure D, and connect the leads to antenna adapter and then insert the 75-300Ω antenna adapter into the 75Ωsocket (see Antenna adapter figure B). Antenna cable with a plug Antenna feeder Power source wire connection Insert the power plug into AC outlet. Figure C Install and replace batteries of the Figure D remote control unit: Coaxial cable(75Ω) twin-lead cable(300Ω) 1.Place the remote control unit with the face down, then open the battery cover of the unit. 2.Place the two"AA"size batteries, matching the + and - signs on each battery to the + and -signs of the battery compartment. 3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Replace the two old batteries at the same time. (4)Don't use charge battery (Ni-cd )and don't mix battery type. (5)Don't throw your batteries into a fire. Dispose of your batteries in a required place. 3 FUNCTION BUTTONS AND EXTERNAL SOCKETS 1.Front Panel ⑤⑥⑦ ② ④ ① ③ ①Remote sensor:Let the remote controller aim here, the set can receive remote control signal. ②Power switch:Press the button to turn on the TV set . Press the button again to turn off the TV set. ③Power indicator: The indicator lights when power on. ④Menu button ⑤Program up/down button ⑥Volume up/down button ⑦TV/AV 2.The sockets on the rear panel ①Antenna socket ②Audio/Video socket ③S-Video socket ④DVD component socket 3.The socket on the side panel ⑤Video input socket ⑥Audio(L) input socket ⑦Audio(R) input socket Y IN Cb Cr 3 VIDEO2 ⑤ L ⑥ AUDIO2 R ⑦ ① S-VIDEO VIDEO L AUDIO R ③ OUT 4 2 ④