Haier 55UGX3500 Use and Care Manual - Page 10

PERIPHERAL CONNECTION AND CONTROLS PERIPHERAL CONNECTION BUTTON CONTROL RF HDMI4 MHL OPTICAL OUT LINE-OUT HDMI1 HDMI2 HDMI3 BUTTON # Item 1 Optical Out 2L R 3 VIDEO 4 YPbPr 5 Line Out Description Connect a optical audio cable from a sound bar, stereo system, receiver, etc. Connect the audio cables for a co mponent or composite device. Connect the video cable for a composite device. Connect the video cables for a component device. The output can be connected to a loudspeaker box or an external Middle key In the standby mode, press the middle button to turn on the TV. In the boot state, long press the middle button to shut down. Left and right keys In the non-menu page, press the left and right keys to adjust the volume addition and subtraction. Under the menu page, you can adjust the parameters. Up and down keys In the non-menu page, you can adjust the TV channel under the program addition and subtraction; Long press the button above to bring up the source, short press the move cursor; Long press the following key to call up the menu, short press to move the cursor. Under the menu page, you can move the cursor up and down. HDMI1 Connect HDMI devices to these HDMI2 6 HDMI3 jacks. An HDMI cable carries both video and sound. You do not need to make an audio connection for an HDMI device. Note: The HDMI4 HDMI4(MHL) port is MHL enabled. 7 RF Connect an antenna or cable TV cable to this jack. 8 USB Insert a USB storage device to the USB port to view JPEG photos, and listen to MP3 music. (See page 16 for more information.) 8