Haier AB242AEEAA Operation Manual - Page 21

Installation Procedure AB282AEERA, AB362ACEAA, AB362AEERA, AB422AEEAA, AB482AEERA, AB482AEEAA 950 860-890(ceiling hole) 690 (Hanging position) over 1500 Wall or barrier over1500 790 860-890 over 1500 149 35 950 85 164 134 840 346 840 346 35 over 1500 88 149 35 35 150 60 287 over 1000 below 3000 Barrier Ground (2) Cut an opening in ceiling for installation if necessary. (when ceiling already exists.) Refer to paper pattern for dimension of ceiling hole. Connect all pipings (refrigerant, water drainage), wirings (inter unit cable) to indoor unit, before installation. Cut a hole in ceiling, may be a frame should be used to ensure a smooth surface and to prevent vibration. Contact your real estate dealer (3) Install a suspending bolt. (Use a M10 bolt) To support the unit weight, anchor bolt shall be used in the case of already exists ceiling. For new ceiling, use built-in type bolt or parts prepared in the field. Before going on installing adjust space between ceiling. Roof Anchor bolt Long nut Suspending bolt Ceiling Note: All the above mentioned parts shall be prepared in field. 50~100 19