Haier AC282AFEAA User Manual - Page 16

Installation of Indoor Unit CONNECTION PIPE REQUIREMENT Table 1 Model Diameter Liquid side Gas side Maximum length For series 362*EAA),422,482, 522, 602 For series 282, 362(ERA) 9.52 mm 9.52 mm 19.05mm 15.88mm 50 m 30 m Maximum height (between indoor and outdoor) 30 m 20 m INSTALLATION PROCEDURE Install the room air conditioner as follows: 1. REMOVE THE INTAKE GRILL AND SIDE COVER Air filter (1) Remove the Air filters (2) Remove the intake grilles (3) Remove the Side cover A (Right and left side) Intake grille (4) This air conditioner can be set up to intake fresh air . For information about how to install for Side cover A (Right side) Side cover A (Left side) fresh-air intake, refer to page 22 "FRESH-AIR INTAKE". 2. LOCATION OF CEILING SUSPENSION BOLTS Fig. 3 30mm Suspension bolt pitch 1530mm 30mm Dimensions (Space Required for installation) 10mm 155mm INDOOR UNIT (TOP VIEW) 300mm Suspension bolt should extend outward 30 to 50mm. For half-concealed installation Supension-bolt pitch should be as shown in Fig.4. Fig. 4 40mm Ceiling Opening:1530mm 40mm Ceiling panel Ceiling Opening:640mm 15mm Ceiling panel Suspension bolt should extend outward 30 to 50mm. 14