Haier ATB11ARW User Manual - Page 11

Reversing the Door Swing

Page 11 highlights

English Reversing the Door Swing Left/right door opening method: This product provides the reversing of the left/right door opening. You can select your preference of door opening by following the procedure to make the change. Dismantling: (see fig. # 1 and fig. # 3) 1. Fix refrigerator and freezer door by sticking adhesive tape on both sides to hold doors in place. 2. As shown in fig. 1, dismantle the hinge box cover on the upper part of freezer door with a phillips head screwdriver. Then remove the three screws from the hinge. Take out the hinge by pulling it vertically, and keep it in a safe place. 3. Remove the adhesive tape on freezer door, lift and take the door down, and carefully put it aside. 4. Dismantle two screws of the central hinge, lift and take down the central hinge, and keep them in a safe place. (see fig # 3) 5. Remove the adhesive tape on refrigerator door, lift and take down refrigerator door, and carefully put it aside. 6. Remove the door stoppers from the freezer and refrigerator doors and install them on the opposite side of the door. screw holes stop of freezer door middle bracket (central hinge bracket) middle pivot pin fig. # 3 stop of refrigerator door 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

9
English
Reversing the Door Swing
Left/right door opening method:
This product provides the reversing of the
left/right door opening. You can select
your preference of door opening by following the procedure to make the change.
Dismantling:
(see fig. # 1 and fig. # 3)
1. Fix refrigerator and freezer door by sticking adhesive tape on both sides to hold
doors in place.
2. As shown in fig. 1, dismantle the hinge box cover on the upper part of freezer
door with a phillips head screwdriver. Then remove the three screws from the
hinge. Take out the hinge by pulling it vertically, and keep it in a safe place.
3. Remove the adhesive tape on freezer door, lift and take the door down, and
carefully put it aside.
4. Dismantle two screws of the central hinge, lift and take down the central hinge,
and keep them in a safe place. (see fig # 3)
5. Remove the adhesive tape on refrigerator door, lift and take down
refrigerator door, and carefully put it aside.
6. Remove the door stoppers from the freezer and refrigerator doors and install
them on the opposite side of the door.
fig. # 3
screw holes
stop of freezer door
middle pivot pin
stop of refrigerator door
middle bracket
(central hinge bracket)