Haier AU282AHERA User Manual - Page 6

Safety Cautions Warning ! Have the unit professionally installed. Improper installation by an unqualified person may result in water leak, electric shock, or fire. Be sure to carefully follow each step in this handbook when installing the unit. Improper installation may result in water leak, electric shock, smoke or fire. Place the unit on a stable, level surface that Have all electrical work performed by a withstands the weight of the unit to prevent licensed electrician according to the local the unit from tipping over or falling causing regulations and the instructions given in injury as a result. this manual. Secure a circuit designated exclusively to the unit. Only use specified cables for wiring.Securely connect each cable, and make sure that the cables are not straining the terminals. Improper installation or a lack of circuit capacity may cause the unit to malfunction or present a risk of electric shock, smoke,and fire. Cables not connected securely and properly may generate heat and cause fire. Securely attach the terminal cover(panel) on the unit. Take necessary safety measures against typhoons and earthquakes to prevent the unit from falling over. If installed improperly, dust and/or water may enter the unit and present a risk of electric shock, smoke, or fire. Do not make any changes or modifications to the unit. In case of problems, consult the dealer. If repairs are not made properly, the unit may leak water and present a risk of electric shock, or it may produce smoke or cause fire. Only use refrigerant R410A as indicated on the unit when installing or relocating the unit. The use of any other refrigerant or an introduction of air into the unit circuit may cause the unit to run an abnormal cycle and abnormal cycle and cause the unit to burst. 4