Haier BC-50 User Manual - Page 10

Troubleshooting

Page 10 highlights

Troubleshooting Before calling the service center, check the following points and see if you can solve the problem yourself. Problem No refrigeration Possible Causes Electrical connection is loose. Fuse is broken. The inner Temperature is not cold enough. Wrong temperature selection. The inner compartment is overfilled. The appliance is exposed to direct sunlight or a heat source, such as heater. Frequent door opens. Unusual noises The appliance doesn't stand level. Some part of the refrigerator rubs against the wall or other furniture. It's normal that the noise of flowing refrigerant can be heard during the interval of the stop and restart of the compressor. The outer surfaces are wet. Rain season of high humidity. If so, dry the surfaces thoroughly. The inner surfaces are wet. The door is frequently opened or it's kept open too long. There are large amount of foods of high water content stored in the refrigerator. Dry the inner compartment thoroughly. .9.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

Before calling the service center, check the following points and see if you
can solve the problem yourself.
Problem
Possible Causes
No refrigeration
Electrical connection is loose.
Fuse is broken.
Wrong temperature selection.
The inner compartment is overfilled.
The appliance is exposed to direct sunlight or
a heat source, such as heater.
Frequent door opens.
The appliance doesn’t stand level.
Some part of the refrigerator rubs against the
wall or other furniture.
It’s normal that the noise of flowing refrigerant
can be heard during the interval of the stop
and restart of the compressor.
Rain season of high humidity.
If so, dry the surfaces thoroughly.
The door is frequently opened or it’s kept
open too long.
There are large amount of foods of high water
content stored in the refrigerator. Dry the
inner compartment thoroughly.
The inner Temperature
is not cold enough.
Unusual noises
The outer surfaces are wet.
The inner surfaces are wet.
.9.
Troubleshooting