Haier BC-76 User Manual - Page 9

The door is not properly closed or

Get Haier BC-76 PDF manuals and user guides View all Haier BC-76 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

In the event of a fault occurring during operation, check first if the fault is due to an operation error. You can repair the following faults yourself. The appliance does not run. 1. It is not switched on properly, or mains plug properly inserted in the socket. 2. The thermostat knob is turned to position "0". 3. Supply voltage is too low. The temperature inside the appliance is not low enough. 1. The appliance is too full of food. 2. The appliance is located too near a source of heat. 3. The door is not properly closed or is opened too frequently. 4. The vent grille is covered over. Excessive noise from the appliance. The appliance is not standing securely on the ground. If none of these circumstances applies and you are not able to repair the fault, please Contact the service point. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
In the event of a fault occurring during operation, check first if the
fault is due to an operation error. You can repair the following faults
yourself.
The appliance does
not run.
1. It is not switched on properly,
or mains plug properly inserted
in the socket.
2. The
thermostat knob is turned to
position “0”.
3. Supply voltage is too low.
The temperature inside
the appliance is not
low enough.
1.
The appliance is too full of food.
2.
The appliance is located too near
a source of heat.
3.
The door is not properly closed or
is opened too frequently.
4.
The vent grille is covered over.
Excessive noise
from the appliance.
The appliance is not standing
securely on the ground.
If none of these circumstances applies and you are not able to
repair the fault, please Contact the service point.
7