Haier BC-80B User Manual - Page 6

Installation Unpacking 1. Remove all packaging material, including the foam base and all adhesive tape holding the cabinet accessories inside and outside. Slide out and remove plastic or foam guard used to secure the compressor from shipping damage due to vibration and shock. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the cabinet. Leveling • Your cabinet has 4 leveling bolts located in the front and rear corners of your cabinet. After properly placing your cabinet in its final position, you can level your cabinet. • Leveling bolts can be adjusted by turning clockwise to raise or counterclockwise to lower your cabinet. The cabinet door will close more easily when the leveling bolts are extended. 5 Door gasket: • Clean the door gasket once every three months to keep it clean and pliable for proper seal. Power interruptions • When occasionally power supply is interrupted due to thunderstorms or other causes, remove the power cord from the outlet. When power has been restored, plug the power cord to the outlet. Vacation and moving care • For long vacations or absences, unplug the cabinet and clean the cabinet and door gaskets according to "General cleaning" section. • The cabinet is always moved vertically to avoid possible darnage to the scaled system. • Attention should be paid to avoid damage of the cooling tubes and refrigerant leaks. Connect the appliance to the power source 24 hours later. 10