Haier D29FV6H-A8 User Manual - Page 4

FUNCTION BUTTONS AND EXTERNAL SOCKETS Figure A Antenna VIDEO R AUDIO L Figure B 75-300 Antenna adapter Antenna connection Connect an antenna to the antenna socket on the TV set, we recommend using a Cable TV system for better picture and audio quality. 1.If you use a coaxial cable(75Ω),insert the antenna plug (see figure C) into 75Ωsocket (see figure A). 2.If you use a twin-lead cable(300Ω),please shape the cable as figure D, and connect the leads to antenna adapter and then insert the antenna adapter into the 75Ωsocket (see figure B). Antenna cable with a plug Antenna feeder Figure C Figure D Ω Ω Coaxial cable(75 ) twin-lead cable(300 ) Power source wire connection Insert the power plug into AC outlet. Install and replace batteries of the remote control unit: 1.Place the remote control unit with the face down, then open the battery cover of the unit. 2.Place the two"AA"size batteries, matching the + and - signs on each battery to the + and -signs of the battery compartment. 3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Replace the two old batteries at the same time. (4)Don't use charge battery (Ni-cd )and don't mix battery type. (5)Don't throw your batteries into a fire. Dispose of your batteries in a required place. 3 FUNCTION BUTTONS AND EXTERNAL SOCKETS 1.Front panel Power switch 2. Back and side panels Power indicator Signal receiver P+ P- Channel position up/down V+ V- Volume up/ down TV/AV TV/AV switching MENU Menu VIDEO R AUDIO VIDEO R AUDIO L L AV OUT AV2 IN AV1 IN VIDEO L AUDIO R YCbCr Y Cb Cr S-VIDEO Antenna input terminal S-VIDEO input terminal YUV(DVD component) input terminal Audio,video input terminal Audio,video output terminal 4