Haier D34FA9-AK User Manual - Page 11

Tune The TV set has three methods to set the channels, which are Auto search, Search, Quick Search and Fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Auto search Auto search 1. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ MENU button to enter. Picture Sound Tune Setup Timer Exchange Program edit Search Auto Search Quick Search CH+ VOL- MENU VOL+ CH- 2. Press the CH+/- buttons to move the indicator to " Auto Search ". MENU Picture Sound Tune Setup Timer Exchange Program edit Search Auto Search Quick Search 3. Press the VOL+ button, and "Auto Search" mode will work. The TV set will search automatically all available programs, after search is finished, all available programs will be stored in turn. Auto Search VHF-L 188.16 MHz CH NO:4 If you want to stop the search, just press the MENU button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only the first time you search the program, and after the order of the program has been made, you don't have to use this function, otherwise the order of the program will be mixed. After searching (Continued) Press the CH+/- buttons to check channels. If the colour or sound is abnormal in a certain channel, it may be because that the colour or sound system has not been set properly, then, you may adjust it to proper system (Refer to page 8).