Haier D530M User Manual - Page 9

Ope atiHg Hst die s START OPERATION 1. Make sure the plug is inserted firmly into the socket 2. Make sure the water tank is placed in the proper position. If the full tank light is on when turning on the machine For the First time, pull out the water tank and push it back into proper position. WHEN FULL TANK LIGHT IS ON When the water tank is full, the indicator light wilI light up and the dehumidifier will stop operating. Empty the i¸ ; water tank and place it back in its proper position. The machine wilI reactivate after 3 minutes. Note: Empty the water from the water tank using two hands. CoHti ' o s B aiHage The continuous drainage function can be activated using the flowing steps. 1. Prepare PVC hose to drain out water. Remove the cap From drainage outlet. 2. Remove Flat rubber insert from cap. 3. Pull the drainage hose through the ring of the cap. 4. Align the hose with the water outlet on the unit first and then fasten the cap back on to the outlet. 5. Place the bucket in its original location. O INSTAL|.ING DRAINAGE PVC HOSE When using the continuous drainage function, the PVC hose must be placed horizontally below the drainage hole. Avoid folding the hose or placing it on an uneven surface.