Haier DTA-1486 User Manual - Page 8

Watching TV You can watch TV program in a preset channel. Watching TV program How to select TV program 1234 5678 90 P+ V- MENU V+ P- P+ V- MENU V+ P- Select the desired program 1 Using "Program number" buttons Directly enter the channel number with the numeric keypad on the remote control. To select channel numbers from 10 ~ 99 press [-/--] button and enter the two digit channel number To select channel numbers from 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number 2 Using the P+/- buttons Press the P+ button to select a channel number in number increasing direction. Press the P- button to select a channel number in number decreasing direction. Select the desired sound Press the V-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~99. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. If the colour or sound of a channel is abnormal Usually this should be set in the Auto position. However if the colours displayed on the screen are incorrect you can manually select the correct colour system. When finish remember to turn it back to auto again so that other programs will still work correctly. To select the colour change option press the MENU button on the remote control. TUNE COLOUR SOUND BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH AUTO BG VHFL OFF 0 If picture colour is abnormal Use the P+/- buttons to select Colour then the V-/+ buttons to change between Auto, PAL, NTSC, SECAM and NTSC443. Press the EXIT button to save the setting. If the picture sound is abnormal Use the P+/- buttons to select Sound then press the V-/+ buttons to select the sound system.