Haier DW15-PFE2W User Manual - Page 21
Cancelling or modifying a cycle, 2 Load Button
View all Haier DW15-PFE2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Cancelling or modifying a cycle A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, " Loading the detergent "). To modify a cycle that is already underway, press the button" A " , all of the settings will be cancelled. To set a new cycle, follow the instructions contained in the paragraph entitled "Switching the dishwasher ON". A 1/2 Load Button This button E (see" Close-up View (Control Panel), letter " B ") makes it possible to wash dishes using only the upper rack if there are not enough dishes for a full load. This will allow you to save on water and energy consumption. To select 1/2 load: Select the programme ( see the paragraph entitled" Switching the dishwaher ON") Press the 1/2 load button " B " , 1/2 load indicator " C " blinks. If the door is closed, after 5 seconds, the programme starts automatically. - Please keep in mind that the amount of detergent should also be adapted to the 1/2 load. - To cancel the 1/2 load, you can press the 1/2 load button " B " again ,until the 1/2 load indicators " C" goes out. C B 20