Haier ESA406N Use and Care Guide - Page 11
To Test Your Power Supply Cord
View all Haier ESA406N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH ELECTRICAL REQUIREMENTS cont. WARNING • Electrical shock hazard • Plug into a mating, grounded 3 prong outlet. • Do not remove the ground prong from the power supply cord. • Do not use a plug adapter, extension cord, surge protector, or multi-outlet adapter • Failure to follow these instructions can result in injury, fire, or electrical shock. TO TEST YOUR POWER SUPPLY CORD: 1. Plug power supply cord into a mating, grounded 3 prong outlet. (See Fig.6) RESET TEST 2. Press RESET (on some devices, a green light will turn on). Fig. 6 3. Press TEST (listen for click; Reset button will trip, and on some devices, a green light will turn off). 4. Press and release RESET (listen for click; Reset button will latch, and on some devices, a green light will turn on). The power supply cord is ready for operation. NOTE: • The RESET button must be pushed in completely for proper operation. (See Fig.7) RESET • The power supply cord must be replaced if it fails to trip when the test Fig. 7 TEST button is pressed or fails to reset. • DO NOT turn the air conditioner on or off by unplugging the power supply cord from the outlet. Always turn the air conditioner on or off at the control panel or by using the remote control. • A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and installed my a qualified service professional. It cannot be purchased at a retail store and must not be repaired by the user. If the power supply cord is damaged please call Haier Customer Service: 1-877-337-3639. • The power supply cord contains no user-serviceable parts. • Opening the tamper-resistant case voids all manufacturer warranties. INSTALLATION REQUIREMENTS PAGE 9