Haier ESD101 User Manual - Page 23

English Troubleshooting Dishwasher does not work: • Check if the circuit breaker needs to be reset or iF the fuse needs to be replaced. • Check if the unit is in "OFF" mode. • Check if the door is open.You may need to close the door properly. • Check that you have pressed "POWER" button after proper selection. Dishware and glassware/flatware are cloudy and not properly cleaned: • Use of old or poor detergent. You need to make sure that detergent is fresh. • The water may be hard in your area. You may need to install a water softener. • Spray arms may be blocked. You may need to rearrange dishware and utensils. • Water pressure may be low. You may need to adjust the water pressure. Make sure it is between 20 to 120 (PSI). • Water temperature may be lower than what is recommended. (120 Degree F / 49 Degree C)You may need to adjust the water temperature on your water heater. • Overloading of You may need to rearrange or remove some dishware from the load. • (May have selected wrong cycle.) Inappropraite cycle selection. You may need to select the proper cycle. Dishes are not dry: • Low water You may need to regulate the water temperature to 120 Degree F / 49 Degree C or select Hi-Temp Wash option. • Make sure the rinse agent dispenser is filled and the proper amount is used. • Avoid nesting and do not overload. • Load items in a tilted position if possible so the water will run off easily. • Dishware washed in higher temperatures will dry faster. • Some plastic materials may need to be towel dried. 22