Haier ESD300 User Manual - Page 24
Wash System, Drying System, Overfill Protection Float - how to clean filter
View all Haier ESD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English Drying Lights up when the dishwasher is drying after the final rinse. Clean Displayed when a wash cycle is complete. The light will remain ON until door is opened. Sanitized Displayed when cycle has met sanitization conditions. The light will remain ON until door is opened. Add Rinse Aid Fill the Rinse Aid dispenser when Add Rinse Aid is lit.A rinse aid prevents water from forming droplets that dry as spots or streaks. If the Rinse Aid dispenser is empty, the light glows when you select a cycle or while a cycle is running. Wash System The five-level wash system provides excellent cleaning results. Three levels of filtration and a soil collector system filter the wash water and prevent food particles from redepositing on the clean dishes. • The wash water continuously flows through the filter, trapping food particles. • Two water jets, located under the spray arm, remove the food particles from the filter. • A coarse strainer prevents bones, pits, and other large objects from entering the pump system. NOTE: Periodically check the coarse strainer and remove any objects on the strainer. Drying System During drying, you can see hot vapor escaping through the vent at the upper left corner of the door.This is normal as the heat dries your dishes. IMPORTANT:The vapor is hot. Do not touch the vent. Overfill Protection Float The overfill protection float ( in the front right corner of the dishwasher tub ) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate. Check under the float for objects that may keep the protector from moving up or down 23