Haier ESD401 User Manual - Page 21
Adding Items During A Cycle, Option Selections - parts
![]() |
View all Haier ESD401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English ADDING ITEMS DURING A CYCLE You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser If the cover is still closed, you can add items. To add items 1. Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door 2. Open the door. If the detergent dispenser cover is still closed, add the item. 3. Close the door firmly until it latches. The dishwasher resumes the cycle after OPTION SELECTIONS You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired. You cancel change an option anytime before selected option begins.For example,you can press an unheated drying option anytime before drying begins. Hi-Temp Wash Select this option to heat the water during parts of the cycle. Higher water temperatures helps clean tough soils. Hi-Temp Wash, with the Pots & Pans,Normal raises the water temperature in the main wash. This option adds heat, water and wash time to a cycle. NOTE: Hi-Temp Wash is an option with the Pots & Pans and Normal cycles. Always use Hi-Temp Wash if you have hard water. Sanitize Rinse Option Select this option to raise the water temperature in the final rinse to the cycle. This high temperature rinse sanitizes your dishes and glassware in accordance With NSF/ANSI standard 184 for Residential dishwasher. Certified residential dishwasher are not intended for licensed food establishments. NOTE: Anti-Bacterial Wash automatically uses this option. Sanitize Rinse is an option with the Pots & Pans and Normal cycle. Only these sanitization cycles have been designed to meet the NSF/ANSI requirements. 20
![](/manual_guide/products/haier-esd402-user-manual-bd50237/21.png)