Haier GDG950AW User Manual - Page 27
Timed Dry Cycle, Auto Dry Cycle
![]() |
View all Haier GDG950AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English AUTO DRY CYCLE GDE/GDG 750AW 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. 2. Set the cycle select dial to required auto dry cycle. The signal, temperature, and dry levels are preprogrammed. To change this setting: • Press the "Dry Level" button to select suitable drying level after powering on the dryer. There are 3 options to choose from: More, Normal, or Less. • Press the "Temp" button to set a suitable drying temperature. • After powering on and selecting the cycle, the dryer selects the pre-programmed temperature. If a different drying temperature is required, press the "Temp" button to select. There are four available drying temperatures: High, medium, Low, and No Heat. • Press the "Signal" button, and the buzzer will sound upon end of cycle. • After switching on, the dryer automatically sets buzzer at "Softer". The user can choose from Louder, Softer, or OFF. • Press Start/Pause button. • When starting the machine, close the door first, then press this button. • If a pause is needed during drying, press this button. Pressing again will resume operation. Note: Your dryer has a preprogrammed wrinkle saver cycle. At the end of the autodry cycle, the beeper will signal that the load is dry. If ignored, the drum will turn for about one minute out of every five minutes, up to one hour. When the door is opened, the feature shuts off. TIMED DRY CYCLE More No rmal Less Dry Level Cycle Select Off High Medium Low No Heat Timed D ry Rack D ry 90 Heavy Duty 60 30 Normal 20 10 Temp Touch Up Delicates Timed Dry Whites Auto Dry Timed D ry Louder Softer Off Signal Clean Lint Drying Cool Down W rinkle Saver Cycle Process GDE/GDG 750AW 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to OFF status. 2. Set the cycle select dial to Timed Dry Cycle. 3. Press "Timed Dry" button to set the required drying time. 4-6. Press "Temp" and "Signal" to define the required programs. Note: For "Timed Dry" program use of "Temp" and "Signal" buttons is the same as for auto-programs. "Dry Level" is inactive. 26
![](/manual_guide/products/haier-gde750aw-user-manual-961ccc1/27.png)