Haier H2SM-21HX03 User Manual - Page 14

C\-/ertical Adjustment When ON/OFF switch is pressed, the vertical louver will move to the adequate positions for each operation automatically. During Cooling, Dry Operation During Heating Operation Swing of Air Flow If air flow direction switch is pressed once, the vertical louver will move within the range of figures as right. Approx.10 degrees Level Leve, `.. Approx. 60 degrees ixing the Flow Directioi If air flow direction switch is pressed again, the vertical louver will be fixed and that position is more memorized. From the next operation the louver will be set at previous position automatically. Level Approx.10 degrees Approx. 45 degrees Level Approx.10 degrees Approx. 60 degrees I NOTICE • When the operation is off, the vertical louver closes the outlet automatically. • DO NOT MOVE THE VETICAL LOUVER BY HANDS. It may make the louver not work properly. In order to move the vertical louver, use remote controller without fail. In case the louver does not work correctly, once stop the operation and turn on again. • During cooling or dry operation, the vertical louver should not be downward for a long time. If this is done, dew drops may appear at the outlet. (Even the louver directions is in the swing range, the louver will move about 10 degrees from horizontal after one hour.) Horizontal Adjustment Audjust the horizontal louner by moving the adjustment tabs. If the system is operated with the horizontal louver faced completely to the left or right under high humidity (e.g. during the rainy season), dew drops may appear at the outlet. 12