Haier HBC-200 Service Manual - Page 24

Why refrigerator cannot be used at low temperature, environment, 1.10 How to know there is

Get Haier HBC-200 PDF manuals and user guides View all Haier HBC-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Refrigerator Model:HBC-70/200（India） MAINTENANCE SERVICE AND TROUBLE SHOOTING cleaned, put on a little talcum powder. If there is still seam, you can put an electrical blower outside the seal bar and make it warm, keep the temperature at 50-60℃, press the bar to make it recover, and press the bar around by hand, so that it can recover. If this is not effective, take a piece of sponge with about 10mm wide, 5mm thick, a little longer than the seam and put it inside the seal bar, i.e., the place between the bottom of seal bar and the door cushion. This will make the seam place higher and adhere to refrigerator body the same as other places. 12.1.9 Why refrigerator cannot be used at low temperature environment When environment temperature is below zero, the lubrication ability of freezing oil in refrigerator compressor will decrease, the compressor will be difficult to start or cannot be started, or Compressor damage may occur. 12.1.10 How to know there is problem with compressor motor It is easy to find out motor problem by checking the resistance of coil. The method is to connect the terminals of "common" and "run" using ohm- meter, the coil resistance can then be determined. Using terminals "common" and "start" can measure the resistance of starting coil. If the value is infinite, the coil must ２３ PDF created with pdfFactory trial version www.pdffactory.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Refrigerator
Model:HBC-70/200
（
India
）
２３
MAINTENANCE SERVICE AND TROUBLE SHOOTING
cleaned, put on a little talcum powder. If there is still seam, you
can put an electrical blower outside the seal bar and make it warm,
keep the temperature at 50-60
℃
, press the bar to make it recover,
and press the bar around by hand, so that it can recover. If this is
not effective, take a piece of sponge with about 10mm wide, 5mm
thick, a little longer than the seam and put it inside the seal bar,
i.e., the place between the bottom of seal bar and the door
cushion. This will make the seam place higher and adhere to
refrigerator body the same as other places.
12.1.9 Why refrigerator cannot be used at low temperature
environment
When environment temperature is below zero, the lubrication
ability of freezing oil in refrigerator compressor will decrease, the
compressor will be difficult to start or cannot be started, or
Compressor damage may occur.
12.1.10 How to know there is problem with compressor
motor
It is easy to find out motor problem by checking the resistance of
coil. The method is to connect the terminals of
“
common
”
and
“
run
”
using ohm- meter, the coil resistance can then be
determined. Using terminals
“
common
”
and
“
start
”
can measure
the resistance of starting coil. If the value is infinite, the coil must
PDF created with pdfFactory trial version
www.pdffactory.com