Haier HBF130W User Manual - Page 9
Repairing
![]() |
View all Haier HBF130W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Repairing In the event of a fault occurring during operation, check first if the fault is due to an operation error. You can repair the following faults yourself. The appliance does not run. 1. It is not switched on properly, or the mains plug is not properly inserted in the socket. 2. The thermostat knob is turned to position "0". 3. Supply voltage is too low. The temperature inside the appliance is not low enough. 1. The appliance is too full of food. 2. The appliance is located too close to a source of heat. 3. The door is not properly closed or is opened too frequently. 4. The vent grille is covered over. Excessive noise from the appliance. The appliance is not standing securely on the ground. If it is none of these circumstances and you are not able to repair the fault, please contact a authorised service agent. .8.
![](/manual_guide/products/haier-hbf130ss-user-manual-46f492e/9.png)